极速赛车结果

ROBERTS 1407 Engineered Wood Flooring Adhesive is an acrylic urethane adhesive designed for the installation of engineered and parquet wood flooring up to 1/2 in. thick and 5 in. wide. This solvent-free adhesive meets the strict requirements of the South Coast Air Quality Management District and may contribute one LEED point for "Low-Emitting Material-Adhesive and Sealant" (IEQ Credit 4.1). The 1407 holds trowel ridges for optimum wood contact, grants excellent working time, and cleans up easily with soap and water. This low VOC, environmentally friendly formulation is low odor and odorless when dry.


Available Sizes:
1407-4 – 4 gallon Plastic Pail
1407-1 – 1 gallon Plastic Pail
1407-30C – 30 ounce Cartridge

ROBERTS 1406 Tongue & Groove Flooring Adhesive is a high strength PVA adhesive with a specialized applicator tip for precise placement of the adhesive.


Available Sizes:
1406-P – 1 pint Plastic Bottle

ROBERTS 1650 MAXCOMPLETE-EZ Hybrid Polyurethane Adhesive is a powerful adhesive manufactured for the installation of engineered wood, solid wood and bamboo flooring. Formulated to bond with concrete, plywood, and cement board, this moisture-cured polyurethane adhesive is highly elastomeric, allowing it to adapt to the natural expansion and contraction of wood, providing a moisture vapor barrier, and a sound reduction layer. This is a low odor, ZERO VOC, and LEED compliant adhesive. After 8 hours curing time, the floor is ready for light foot traffic.

Available Sizes:
1650-2 - 2 gallon Plastic Pail

ROBERTS 1530 MAXGRAB Polyurethane Adhesive is manufactured for the installation of engineered wood, solid wood, parquet, and bamboo flooring. Formulated to bond with concrete, plywood, and cement board, this moisture-cured polyurethane adhesive is highly elastomeric, allowing it to adapt to the natural expansion and contraction of wood. This adhesive has low odor, is LEED EQc 4.1 Compliant and has VOC less than 60. It has a curing time of approximately 6 to 8 hours for light foot traffic, and is easy to clean off by using ROBERTS 5505 Urethane / Multipurpose Adhesive Remover.

Available Sizes:
1530-4 - 4 gallon Metal Pail

ROBERTS 1404 Wood Flooring Adhesive is an adhesive specifically designed to adhere 3, 5 and 7-ply engineered wood flooring and pre-finished parquet.
It develops an excellent initial tack to assist in holding boards in place during installation which makes installation easier. It remains flexible and moves with the wood as it reacts to environmental changes.


Available Sizes:
1404-4 – 4 gallon Plastic Pail

ROBERTS®8600 NOSEBONDTM is an advanced acrylic adhesive specially formulated for interior stair nose installation on wood, laminate, and rigid PVC properly prepared subfloors. This water-resistant adhesive featuring GoldGuard® antimicrobial product protection is
manufactured for interior use only, and ideal for wood moldings, wood trim installations and repairs. Low odor, enviro-friendly, solvent-FREE, and LED compliant with a VOC > 2 g/L, it has a curing time of 8 to 10 hours. It is easy to clean up with warm, soapy water when fresh, and with mineral spirits when dried.

Available Sizes:
8600-10C - 10 oz. cartridge (295 mL)

ROBERTS 1550 MAXCOMPLETE Polyurethane Adhesive is manufactured for the installation of engineered wood, solid wood, parquet, and bamboo flooring. Formulated to bond with concrete, plywood, and cement board, this moisture-cured polyurethane adhesive is highly elastomeric, allowing it to adapt to the natural expansion and contraction of wood. It can be applied with a 1/4 in. Flat V-Notch trowel when moisture mitigation is NOT necessary and with a 1/4 in. x 3/16 in. Tiger Tooth trowel for moisture mitigation purposes. It covers approximately 30-35 sq. ft. per gallon with a curing time of approximately 6 to 8 hours for light foot traffic when applied with adhesive- only trowel, and 12 hours when applied with moisture-control trowel. Can be sanded after 18 hours. This adhesive has low odor, is LEED EQC 4.1 Compliant and VOC less than 60. It is easy to clean off by using ROBERTS 5505 Urethane Adhesive Remover.

Available Sizes:
1550-4 - 4 gallon Metal Pail